System integrator of Building Energy Management Systems (BEMS)
Multiple systems support and design including Trend IQ1X- IQ™VISION, Distec/Honeywell, CentraLine, Delta controls and various PLCs.
We make buildings smarter and support by helping businesses reduce their energy costs, no matter the infrastructure application.
About
Broad Energy Controls takes pride in being amongst the emerging Building Energy Management companies in the UK and Ghana that uses internationally recognised technology to provide installation and support coverage. Our engineers based in the UK have over 20 years of collective experience in numerous building energy management platforms.
WHAT IS BEMS?
Organisations save up to 25% – 35% of energy with BEMS doing the following:
- Using motion sensors to detect movement to control lighting in a building. Allowing access to engineers and management.
- Collecting analysis on the temperature readings of the building and detecting how long the building load was on for on a daily basis.
- Using fresh air instead of AC to create temperature comfort in a building.
- Using duty/standby systems to increase the longevity of equipment such as fans and pumps. This mitigates against down time in the event of a mechanical failure, in addition to decreasing and preventing unnecessary maintenance costs.
We work extensively with our clients to understand their specific needs and provide a high standard of aftercare support.
Benefits of BEMS
Building Management Systems (BMS) facilitate the management of a building with all of its control and monitoring systems. BMS mainly utilizes BACnet protocol but can integrate with a wide range of other protocols such as Modbus, M-Bus, CAN bus, TCP/IP, RS-232, DALI, and others to centralize the control of a facility in to one local or remote operator.
BMS is designed to be the nervous system of a building. The control panels have all the processing power within its controllers. Sensors and probes act to monitor and feedback vital information to the control panel where information is processed. Driver outputs to actuators do all the hard work to control main plant equipment.
Common applications of BMS control in HVAC are: chillers, pumps, air handling units, fan coil units, boilers etc.. Each one of these systems has a sequence of operation programmed in the control panel.
The Future is Integration
In the past 2 decades there has been a rising demand for energy-saving in all industries. BMS systems have been the optimum solution to wasting energy in commercial buildings and is now increasingly used in domestic facilities.
BMS is an integrated solution of all the control and monitoring systems present in a building. It combines and automates the operation of HVAC (Heating, Ventilation and Air Conditioning), access control, metering, lighting etc., for the main reason of saving energy.
Read moreSupport
We are in a unique position, able to provide emergency call out, on call weekly support to our clients
Providing fully qualified BMS support engineers to tackle any faults occurred.
We adopt an individual approach to support existing BEMS sites, design and installation. The availability of our regional teams ensures that every customer receives a personalised service.
BMS 24 hour Call out service
We provide a same day swift 1st response service to all approved clients.
Responding to sites within London to carry out protection and critical BMS investigation issues with the aim of providing an immediate solution where possible for approved BMS companies that are unable to supply a qualified BMS engineer on the same day. For a reliable 2 – 4 hour response time to cover any emergency ‘BMS call out’ if required. Systems covered include Trend Controls, Centraline, Delta, Tridium and others.
We retain fully anonymous client base, our clients include some of the top leading BMS companies based in the UK.
Feel free to get in touch and sign up to our approved client list. Once you are registered with our team you can begin to use our call out service, find out more about and apply.
Email enquiries to: info@broadenergycontrols.com
Redefining Energy Management
Web-Based Energy & BMS Management
Our web-based energy management platform, enables users to access real-time and historic energy, BEMS and environmental data.
Our interactive, browser-based user interface means that BEMS can be used to manage and analyse data, build and schedule reports and configure notifications. BEMS is a flexible, scalable solution, suitable for multi-site, multi-utility, corporate customers as well as standalone single-site installations. The key functionality of BEMS lies in the management and presentation of data.
Solar Integration:
We supply and commission a selected range on quality solar energy solutions.
The Benefits of Generating Your Own Power and integrating BEMS with Solar
Solar energy is a renewable energy source that does not release harmful carbon dioxide or other pollutants into the atmosphere, lightening your carbon footprint.
Generate Energy – Use your solar panels to generate your own energy.
Store Energy – Use battery storage to store your solar energy.
Use Energy – Power your home when the sun goes down, before relying on the national grid.
Monitor and manage Energy – Integrate Solar with BEMS
UPS supply and monitoring: Uninterruptible power supply or UPS provides instantaneous backup power when there is a loss of power supply from the mains supply or if the voltage level drops.
Optimisation
Optimisation is the key and our focus is to cut energy use, enhance efficiency and protect internal environments by making better use of your systems. We show you how.
We strongly believe and have a great focus on optimising BEMS. We take pride in ensuring that our clients and their buildings are saving as much energy as possible on their HVAC and lighting equipment – putting the very needs of our customers first!
Service & Maintenance / Emergency Call Out Support
We also provide maintenance services to all of our projects as well as existing buildings. Through our maintenance visits, we ensure that the BEMS are working as required, as well as constantly analysing and improving the ways we can save you money on your energy costs.
Project Management & Support
We install new BEMS as well as upgrading current systems. From design, procurement and manufacture to on-site installation – we handle it all. This includes commissioning and validation of HVAC control solutions and building management systems:
- On-site installation and commissioning
- Engineering design and building management
- Post contract support
Energy Billing Management Software
Energy Management
A Building Energy Management System is key to minimizing the energy costs within your building. Our Engineers can provide detailed surveys of your premises along with effective energy management advice. We will highlight and implement energy-saving recommendations for you as we find them during our surveys.
We ensure that our energy saving measures are maintained, providing the client with benefits and savings.
Smart Metering & Monitoring
Collect all your building’s analytical data from your energy management system to get a unified, real-time view of operating performance, and drive improvements.
With this platform, users can automate compliance reporting, manage utility bills and collect data for analysis, as well as compare performance across buildings and time periods.
Why Broad Energy Controls?
We have vast experience in delivering project installations and we’ll get to know your business inside out, in order to provide you with a tailored solution.
Dedicated project engineers work closely with consultants, contractors and end users throughout the project to ensure a consistently good service. We aim to deliver your project on time, on budget and to your satisfaction.
As a building services and engineering consultancy we thrive on providing strategic engineering advice to our clients.
Broad Energy Controls undertakes the installation of Building Energy Management Systems for new-build projects, site expansions, retrofits and system upgrades. We manage the complete project from design and manufacture of motor control panels, through to the installation, commissioning and final client demonstration.
We now have an office based in the heart of West Africa (Ghana) with a multi skilled and qualified engineering team that can carry out projects and maintenance activities. We are able to provide support and assist local or international partners in this rapidly developing region.
Please feel free to get in touch with our team and we can discuss the limitless integration potential.
Contact
London Head Office:
Ghana Office:
For call out support:
© 2023 Broad Energy Controls